TERMINUSPlateau

A desk tray in three layers on one black pole, with a place for an Apple Pencil, an AirPods case and the small things you put down at the end of the day.

€59,00livraison en sus

Version

Couleurs

Jeux de couleurs

Plateau

Socle

Tige

Plaque noire, tige et bande de fond dans une seule couleur.

Écrou borgne

Tray: 190 x 84 mm
Height: Tray 41 mm, Tray and pole 101 mm
Pockets: Pencil 172 x 10.5, AirPods 64.2 x 49.2, dish 65 x 49, all 12 deep
Layers: Plate 12, floor band 3, base 7 on a 3 mm plate
Material: PLA, matte stone texture
Edition: Numbered, between the layers
Made: To order, in Germany

Images06

The name

A boundary stone for the desk.

Terminus was the Roman god of boundary stones. The TERMINUS bookend marks where a row of books ends. The tray marks where the day ends: the Pencil goes in its channel, the AirPods in their bed, a ring in the dish.

Three layers drop onto one black pole. The middle one is a thin black band, and it is the floor of every pocket, so the line round the tray runs on inside it.

TERMINUS Tray from above with an Apple Pencil, an AirPods case and a ring

Putting it together

Three layers, one pole.

Lay the black plate flat, the pole up.
Slide the base down the pole, the two small pegs up.
Drop on the floor band, black side up, then the plate with the pockets, rounded edge up.
Tray: screw the cap nut on by hand until the layers are tight.
Tray and pole: screw the pole crown on until the layers are tight, then the cap nut onto the crown until it stops.
Lift the Pencil from the round well in the middle of its channel.

Détails

What you choose

Version. Tray: the Cobalt cap nut sits on the tray and locks it, 41 mm high. Tray and pole: a black pole rises 46 mm above the tray from a ring and the cap nut crowns it, 101 mm high, like the TERMINUS bookend.
Plate. The top layer, with the three pockets cut through it.
Base. The lower layer under the black floor band.
Pole. The plate under the tray, the pole, the floor band and, on Tray and pole, the pole crown. They are one colour, so the floor of every pocket and the line round the tray match the pole.
Cap nut. Cobalt, as on every TERMINUS, or any colour from the list.

Size and fit

Tray 190 x 84 mm. Height 41 mm (Tray) or 101 mm (Tray and pole).
Pencil channel 172 x 10.5 mm, 12 mm deep, with a round well 30 mm across in the middle, so two fingers can reach the Pencil and lift it. Drawn for Apple Pencil Pro and Apple Pencil (USB-C), both 8.9 mm across.
Bed for an AirPods case lying on its back: 64.2 x 49.2 mm, 12 mm deep. Drawn for the AirPods Pro 3 case (62.2 x 47.2 x 21.8 mm). Other cases are not checked.
Dish 65 x 49 mm, 12 mm deep, for a ring, keys or clips.
Every tray is made to order in our studio in Germany and carries its own number, hidden between the layers.

Putting it together

Lay the black plate flat, the pole up.
Slide the base down the pole, the two small pegs up.
Drop on the floor band, black side up, over the pegs.
Drop on the plate with the pockets, rounded edge up, over the pegs.
Tray: screw the cap nut on by hand until it holds the layers tight. Tray and pole: screw the pole crown on until it holds the layers tight, then screw the cap nut onto the crown until it stops.

No tools and no glue. Everything comes apart again.

Material and care

PLA. The plate and base have a matte stone texture on the sides. The top of the tray and the floor of every pocket have an even, fine matte finish. The pole, plate and floor band are smooth.
Dust with a dry, soft cloth. No water, no cleaning agents.
Keep away from heat: no radiator, no direct summer sun, no hot car. PLA starts to soften at about 52 °C.

Safety